PLAN · INTERACTIVE WORKSPACE

Make your setup fit.
Before you buy.

Drag equipment onto a to-scale floor plan, check clearances and review power and airflow estimates. Your setup is built around real physical dimensions.

TO-SCALE · FLOOR / CANOPY / DUCT
WORKSPACE

Your 2D Setup Planner

Preview footprint presets in the dark workspace summary below, or use the full millimeter-scale interactive collision & Bill of Materials engine right underneath.

● Live mm-scale engineJump to full controls
LAYOUT CANVAS
1219 × 610 mm1:24 visual scale
FLOOR ZONE · DASHED CLEARANCE MARGIN
LED PANEL · CANOPY HANG
✳✳✳✳
0 ━━━━━━━━━━━━━ 1.2 m
Use the millimeter-scale collision & BOM engine directly below for exact coordinate validation.Jump to interactive mm-scale canvas ↓

1. Enclosure & Equipment Controls

Official Manufacturer Spec · Mm-Scale Geometry
Select Tent Footprint Preset:

Add Sourced Equipment to Layout

2. To-Scale 2D Diagram & Collision Alerts

Drag items directly on the canvas or use keyboard arrow keys / numeric inputs. Overlapping items in the same mount zone or items crossing the dashed perimeter clearance trigger instant collision alerts.

AC Infinity CLOUDLAB 642 (2×4 ft): 1219 mm (W) × 610 mm (D)5-Gal Container #15-Gal Container #2Spider Farmer G3000 30AC Infinity CLOUDLINE
PASS — All 4 placed items fit within 1219×610 mm with zero same-zone collisions and 76.9 cm vertical canopy clearance.
Electrical Load (30d):
328 W peak (~2.73 A @ 120V)
182.16 kWh / mo · $29.15
Airflow Balance:
Installed: 205 CFM vs Target: 20 CFM
Meets indicative target
Vertical Canopy Stack:
76.9 cm available canopy height
106 cm occupied by pot + light + filter drop

3. Accessible Bill of Materials (BOM), Coordinates & Export / Restore

Full tabular alternative to the 2D diagram above, plus lossless JSON export and import.

Placed equipment coordinates, dimensions, power draw, and collision status
Equipment ItemMount ZonePosition (X, Y mm)Footprint (W × D mm)Power / AirflowFit Status
5-Gal Container #1
Standard 5-gal horticultural container envelope
Floor Zone(140, 140) mm · 0°340 × 340 mm0 WFits Cleanly
5-Gal Container #2
Standard 5-gal horticultural container envelope
Floor Zone(720, 140) mm · 0°340 × 340 mm0 WFits Cleanly
Spider Farmer G3000 300W Bar Fixture
Manufacturer Datasheet (src-spiderfarmer-g3000)
Canopy Hang(300, 65) mm · 0°600 × 480 mm300 W (18h/d)Fits Cleanly
AC Infinity CLOUDLINE PRO T4 (205 CFM)
Manufacturer Datasheet (src-acinfinity-t4)
Top Duct/Filter(120, 80) mm · 0°250 × 160 mm28 W (24h/d) · 205 CFMFits Cleanly
HOW PLANNING WORKS

One connected design process

From the first measurement to an exportable equipment list—each decision informs the next.

01

Define your enclosure

Set width, depth, height and wall clearance in millimeters or inches.

02

Place the real components

Position containers, LED fixtures and ventilation equipment across floor, canopy, and duct zones.

03

Review load and airflow

Estimate electrical demand, 15A continuous circuit headroom, and indicative air exchange.

04

Export the Bill of Materials

Keep coordinates, verified model names, provenance states, and fit warnings together as JSON.

Laptop showing a grow tent planning interface
YOUR NEXT STEP

Turn your layout into an equipment decision.

Take the models and capacity requirements from your plan into the verified Equipment Explorer—then compare real manufacturer specifications side by side.

Research equipment Compare models