CENTRALIZED ENGINEERING UTILITY · NO ACCOUNT REQUIRED

Ventilation & Static Pressure CFM Estimator

Calculate enclosure volume and baseline air-exchange requirements in CFM and m³/h, then apply transparent restriction multipliers for activated carbon filters, ducting bends, and lighting heat loads.

Static-Pressure Adjusted CFM & m³/hSI Metric & Imperial UnitsShareable URL State
Calculated / Estimated · Volumetric Air-Exchange Formula
Enclosure Volume: 112 ft³ (3.17 m³) · Baseline Unobstructed: 37.33 CFM · Indicative Adjusted Target: 46.67 CFM (79.3 m³/h · 22 L/s)
Formula: Adjusted CFM = ((Length_ft × Width_ft × Height_ft) × ACH ÷ 60) × RestrictionMultiplier

This is an illustrative volumetric air-exchange calculation, not an HVAC engineering specification or fan certification. Actual airflow depends on fan static-pressure curves (Pa / in. w.g.), carbon bed thickness, duct diameter, bend count, and sensible/latent heat load.

TECHNICAL METHODOLOGY & FORMULAS

How This Calculation & Inputs Work

Baseline airflow is determined by multiplying your enclosure volume (Length × Width × Height) by your target air changes per hour (ACH) and dividing by 60 minutes. Because carbon beds and flexible duct turns create static pressure resistance, the estimator multiplies ideal CFM by your selected restriction multiplier so you can run an EC inline fan at a quieter 50%–75% duty cycle.

DETERMINISTIC AIR EXCHANGE & STATIC PRESSURE FORMULASIdeal CFM = (Tent Volume in ft³ × Air Changes per Hour) ÷ 60 Recommended Fan Free-Air Rating = Ideal CFM × Restriction Multiplier (1.00× to 1.65×) Unit Conversion: 1 CFM = 1.6990108 m³/h = 0.4719474 L/s